Lustre IC Clearstone Coating Resin for Benchtop marble, vanity limestone, sandstone

           10 Year Guarantee against all staining and etching

 Contact our team - Donovan 021792498 or Steve 021665713

Lustre IC Clearstone coating is not a polyurethane but a formulated polyester based resin system which is water clear and non- yellowing that can be applied to many types of natural stones including marble, limestone, sandstone etc .

Lustre Clearstone is specifically developed coating to be applied to the stones surface which has outstanding stain and chemical resistance.

The process is carried out on-site and 100% guarantee no dust and no mess.

Lustre Clearstone Coating is finished in such a manner that it does not look artificial or plastic coated and appears as a natural stone factory finish.

You won't have to worry about bacteria, odor's, stains, or etches affecting your stone anymore. Available from matt to a full gloss finish that makes your stone surfaces easy to clean & maintain.

Lustre Clearstone turns marble, limestone & sandstone into a elegant worry free working surface.

Lustre clearstone coating allows the freedom of choice to use marble, limestone, sandstone, and other stones for their beauty and opulent characteristics. It is ideal for both domestic and commercial applications for either rejuvenating old stone or protecting new stones, used particularly in areas such as bars, kitchen bench tops and bathroom vanities.

Available from a Matt to a Full Gloss Finish, Lustre Clearstone coating makes your stone surfaces easy to clean & maintain.

There’s now no restriction when choosing natural stone, Lustre CLEARSTONE can transform it into a trouble free work surface. Lustre CLEARSTONE... The ultimate in stone protection.

Where can Lustre Clearstone Coating be used?

Ideal for bar tops, kitchen tops, vanity tops. The coating can be either applied prior to or following installation of a new top, subject to particular onsite circumstances, such as size or site joints etc. The coating can also be applied to an existing top to restore a damaged surface.

 How is Lustre Clearstone Coating applied?

Our "Honed" finish is recommended for a natural stone look; however the stone coating can be polished to any level of gloss. Note: 48 hours should be allowed prior to fine sanding and polishing to the required level to allow the stone coating to reach reasonable hardness.

 Is Lustre Clearstone Coating scratch resistant?

Following the initial curing of the stone coating, the surface attains a hardness of approximately 2 [similar to that of limestone] on a MOH scale [used for stone] of 1 to 10 with the max.hardness of approximately 3.5 - 4 [similar to that of marble] being reached by three months, depending on the local temperatures. Scratches may occur prior to full surface hardening but these can be easily removed.

 Can hot containers be placed on Lustre Clearstone Coating?

Whilst one of the properties of our stone coating is an exclusive clear heat rejection additive, it is not recommended to place hot pans or hot dishes directly on the surface, always use a protective mat.

 How long will the application process take and how much will Lustre Clearstone Coating cost?

These are variable questions and would need to be assessed job by job. In the case of onsite application in particular we would need to take into consideration the size, location and any other constraints or circumstances. Please contact us to discuss further.

 Can Lustre Clearstone Coating be resurfaced?

Yes! The surface can be re-polished as per step [4] at any time. If in extraordinary circumstances the surface has become heavily scratched it can be recoated with the Lustre Clearstone Coating Top Layer. Note: If the Lustre Clearstone Coating is damaged in a small area it can be locally repaired without visible trace

 Can Coating be used to repair chips prior to coating?

Yes, the Coating Prime layer can be coloured, tinted or filled with stone granules for repairs before the 'Base Prime' coat is applied.

 How is Lustre Clearstone Coating maintained?

The stone coating is a hardwearing durable surface that is easy to maintain using soapy water or standard cleaning materials, - spills simply wipe off. Note: Do not use sharp knifes or blades directly on the bench top’s surface – always use a chopping board.

Who can apply Lustre Clearstone Coating?

Lustre Ltd is the sole provider and applicator in New Zealand.

Can Lustre Clearstone Coating be applied to granite?

The stone coating has been developed specifically for marble, limestone and sandstone. However, it may be possible to coat some granites but it is recommended that a sample be subjected for trial with our coating. Please contact us for further information..

Why use Lustre Clearstone Coating?

Marble and Limestone are composed of calcite which is highly sensitive to acid spills which corrodes the surface [etching] thus damaging the polished or honed finish. Some Marble and Limestone can also be porous and susceptible to staining. Stones such as unfilled 'Travertine' have natural cavities which can be filled with clear composite to highlight the features in the stone. Stones such as Sandstone and Basalts are not receptive to a high honed or polished finish and are easily susceptible to staining. The application of our Lustre Clearstone Coating enriches the colours and veins of such materials and makes them suitable as a bench top surface.

Lustre Clearstone Coating has been developed to turn Marble, limestone and Sandstone into an elegant WORKING worry free surface.